Home Corner

Creating a Comfortable Living Space

DIY Bathroom Floor: 10 Tips for a Perfectly Refinished Look

3 min read
DIY Bathroom Floor: 10 Tips for a Perfectly Refinished Look

DIY Bathroom Floor: 10 Tips for a Perfectly Refinished Look

Are you looking to give your bathroom floor a perfect, professional-looking finish? You don’t need to hire a contractor to get the job done. All you need is the right tools, some time and effort, and these 10 tips for a perfectly refinished look.

1. Choose the Right Flooring

The first step in any DIY bathroom floor project is to choose the right flooring. Consider your lifestyle and the needs of your family. Laminate flooring is a popular choice for bathrooms because it’s waterproof, scratch-resistant, and easy to clean. Vinyl plank flooring is also a great option, as it’s durable and comes in a variety of sizes and styles.

2. Prep Your Subfloor

Before you start laying your new flooring, you’ll need to prep the subfloor. This includes cleaning the surface to remove any dirt or debris, and making sure it’s level and stable. If you’re dealing with a concrete subfloor, you may need to use a self-leveling compound to ensure a smooth surface.

3. Measure and Cut the Flooring

Once you’ve prepped the subfloor, you can start measuring and cutting the flooring. Be sure to use a measuring tape and make careful, accurate cuts. You can use a jigsaw to cut curved pieces, or a circular saw to cut straight pieces.

4. Lay the Flooring

Once you’ve cut the flooring to size, you can start laying it. Be sure to leave a small gap between the wall and the flooring to allow for expansion. Start at one corner of the room and work your way out. You can use a tapping block and hammer to tap the pieces together, or you can use a flooring stapler to secure them.

5. Install the Trim

Once you’ve laid the flooring, you can install the trim. Start by measuring and cutting the trim pieces to size, then use a miter saw to make angled cuts. Secure the trim pieces in place with nails or glue.

6. Apply a Finishing Coat

Once the trim is in place, you can apply a finishing coat. This will protect the flooring and give it a professional-looking finish. Choose a finish that is specifically designed for the type of flooring you’ve installed.

7. Seal the Floor

Once the finishing coat has dried, you can seal the floor. This will help protect it from spills and damage. Be sure to use a sealer that is designed for the type of flooring you’ve installed.

8. Clean and Maintain the Floor

Once the floor is sealed, it’s important to clean and maintain it. Use a damp mop to remove dirt and debris, and use a vacuum for deeper cleaning. Avoid using harsh chemicals or abrasives, as these can damage the floor.

9. Keep the Floor Dry

In order to keep your floor looking its best, it’s important to keep it dry. Avoid standing water, and be sure to dry the floor thoroughly after cleaning. If you have a shower or tub, use a squeegee to remove excess water.

10. Reapply the Finish

Over time, the finish on your floor may start to wear off. To extend the life of your flooring, it’s important to reapply the finish every few years. This will help keep the floor looking its best and protect it from damage.


DIY bathroom flooring can be a great way to give your home a professional-looking finish without spending a lot of money. With the right tools and a bit of time and effort, you can have a perfectly refinished look in no time. Just follow these 10 tips for a perfectly refinished look, and your bathroom floor will look like it was done by a pro. For more helpful tips and information, visit millinews.com.

denitomiadv.com © All rights reserved. | Newsphere by AF themes.